Hydrous Benzoyl Peroxide USP Grade
C14H10O4 (anhydrous) --- 242.23
Peroxide, dibenzoyl.
Benzoyl peroxide --- [94-36-0].
Hydrous Benzoyl Peroxide contains not less than 65.0 percent and not more than 82.0
percent of C14H10O4. It contains about 26 percent of water for the purpose of
reducing flammability and shock sensitivity.
Caution:Hydrous Benzoyl Peroxide may explode at temperatures higher than 60C or
cause fires in the presence of reducing substances. Store it in the original
container, treated to reduce static charges.
Packaging and storage: Store in the original container, at room temperature.
[NOTE—Do not transfer Hydrous Benzoyl Peroxide to metal or glass containers fitted
with friction tops. Do not return unused material to its original container, but
destroy it by treatment with sodium hydroxide solution (1 in 10) until addition of a
crystal of potassium iodide results in no release of free iodine.]
Identification:
A: Chromatograph Comparision to pass the test.
B: To pass the test.
Assay: Place about 300 mg of previously mixed Hydrous Benzoyl Peroxide in an
accurately weighed conical flask fitted with a ground-glass stopper, and weigh again
to obtain the weight of the test specimen. Add 30 mL of glacial acetic acid,
previously sparged with carbon dioxide for not less than 2 minutes just before use,
and swirl the flask gently to effect solution. Add 5 mL of potassium iodide solution
(1 in 2), and mix. Allow the solution to stand for 1 minute. Titrate the liberated
iodine with 0.1 N sodium thiosulfate VS. As the endpoint is approached add 1 drop of
starch iodide paste, or equivalent, and continue the titration to the discharge of
the blue color. Perform a blank determination, and make any necessary correction.
Each mL of 0.1 N sodium thiosulfate is equivalent to 12.11 mg of C14H10O4.
Hydrous Benzoyl Peroxide BP Ph Eur Grade
C14H10O4 --- 242.2 --- 94-36-0
Action and use: Used topically in the treatment of acne.
DEFINITION
Content:
dibenzoyl peroxide : 70.0 per cent to 77.0 per cent;
water: minimum 20.0 per cent.
CHARACTERS
Appearance: White or almost white, amorphous or granular powder.
Solubility: Practically insoluble in water, soluble in acetone, soluble in
methylene chloride with the separation of water, slightly soluble in ethanol (96 per
cent).
It loses water rapidly on exposure to air with a risk of explosion.
Mix the entire sample thoroughly before carrying out the following tests.
IDENTIFICATION
First identification B.
Second identification A, C, D.
A. Ultraviolet and visible absorption spectrophotometry.
B. Infrared absorption spectrophotometry. Comparison Ph. Eur. reference spectrum of
hydrous benzoyl peroxide.
C. Dissolve about 25 mg in 2 mL of acetone. Add 1 mL of a 10 g/L solution of
diethylphenylenediamine sulfate and mix. A red colour develops which quickly darkens
and becomes dark violet within 5 min.
D. To 1 g add 5 mL of ethanol (96 per cent), 5 mL of dilute sodium hydroxide
solution and 10 mL of water. Boil the mixture under reflux for 20 min. Cool. The
solution gives reaction of benzoates.
TESTS
Acidity: Dissolve a quantity of the substance to be examined
containing the equivalent of 1.0 g of dibenzoyl peroxide in 25 mL of acetone, add 75
mL of water and filter. Wash the residue with two quantities, each of 10 mL, of
water. Combine the filtrate and the washings and add 0.25 mL of phenolphthalein
solution. Not more than 1.25 mL of 0.1 M sodium hydroxide is required to
change the colour of the indicator. Carry out a blank test.
Related substances: To pass the test.
Chlorides: Maximum 0.4 per cent.
Hydrous Benzoyl Peroxide BP Ph Eur Grade
C14H10O4 --- 242.2 --- 94-36-0
Action and use: Used topically in the treatment of acne.
DEFINITION
Content:
dibenzoyl peroxide : 70.0 per cent to 77.0 per cent;
water: minimum 20.0 per cent.
CHARACTERS
Appearance: White or almost white, amorphous or granular powder.
Solubility: Practically insoluble in water, soluble in acetone, soluble in
methylene chloride with the separation of water, slightly soluble in ethanol (96 per
cent).
It loses water rapidly on exposure to air with a risk of explosion.
Mix the entire sample thoroughly before carrying out the following tests.
IDENTIFICATION
First identification B.
Second identification A, C, D.
A. Ultraviolet and visible absorption spectrophotometry.
B. Infrared absorption spectrophotometry. Comparison Ph. Eur. reference spectrum of
hydrous benzoyl peroxide.
C. Dissolve about 25 mg in 2 mL of acetone. Add 1 mL of a 10 g/L solution of
diethylphenylenediamine sulfate and mix. A red colour develops which quickly darkens
and becomes dark violet within 5 min.
D. To 1 g add 5 mL of ethanol (96 per cent), 5 mL of dilute sodium hydroxide
solution and 10 mL of water. Boil the mixture under reflux for 20 min. Cool. The
solution gives reaction of benzoates.
TESTS
Acidity: Dissolve a quantity of the substance to be examined
containing the equivalent of 1.0 g of dibenzoyl peroxide in 25 mL of acetone, add 75
mL of water and filter. Wash the residue with two quantities, each of 10 mL, of
water. Combine the filtrate and the washings and add 0.25 mL of phenolphthalein
solution. Not more than 1.25 mL of 0.1 M sodium hydroxide is required to
change the colour of the indicator. Carry out a blank test.
Related substances: To pass the test.
Chlorides: Maximum 0.4 per cent.
